Vandal Resistant Framed Mirror w/ Plexiglass

• Vandal Resistant: Engineered to withstand intentional damage.
• Made in USA: Assuring quality and reliable durability.
• Concealed Torx Security Screw Lockable: Enhancing security through obscured locking mechanisms.
• No Glass Design: Utilizing mirror-polished stainless steel to ensure safety and durability.
• Protective Sacrificial Plexiglass: Economically replaceable, safeguarding the primary reflective surface.
• Surface Mounted: Facilitating secure and versatile installation.
• Corrosion Resistant: Prolonging the unit’s lifespan in various environments.
• Industry Leading Warranty Against Vandalism: Safeguarding your investment.

At Vandal Stop, we are committed to providing products that contribute to sustainable building practices and support LEED certification. Our range of vandal-proof products, including toilet paper dispensers, paper towel dispensers, soap dispensers, and mirrors, are designed with the environment in mind.

Key Sustainability Features:

• Durability and Longevity: Our products are built to withstand high-traffic and high-vandalism environments, reducing the need for frequent replacements and minimizing waste.
• Recyclable Materials: We use materials that are fully recyclable, with a special emphasis on stainless steel, which is 100% recyclable an infinite number of times, ensuring minimal environmental impact at the end of the product's life cycle.
• Low Maintenance: Designed for easy maintenance and long-term use, our products help to lower the overall environmental impact by minimizing the need for cleaning agents and resources.
• Reduced Resource Consumption: Our dispensers are engineered to optimize usage, reducing waste of paper and soap, and promoting efficient use of resources.
• Support for LEED Certification: Vandal Stop products can contribute to LEED points in various categories, including Indoor Environmental Quality, Materials and Resources, and Innovation in Design.

By choosing Vandal Stop products, you are not only investing in high-quality, durable solutions but also supporting a more sustainable future.

For more detailed information on our sustainability efforts and how our products contribute to green building practices, please visit our Green/LEED/Sustainability page.

• Public Restrooms: In parks, transport hubs, and recreational areas.
• Educational Institutions: Such as schools, colleges, and universities.
• Retail Centers: Including malls and department stores.
• Corporate Buildings: Ensuring a professional appearance in all facilities.
• Hospitality Venues: Such as hotels and restaurants.
• Healthcare Facilities: Including hospitals and clinics.
• Government Buildings: Maintaining a clean and secure environment for public and employees.
• Entertainment Venues: Like theaters and concert halls.
• Shelters and Support Centers: Homeless shelters, rehabilitation centers, and community support facilities.
• High-Risk Areas: Locations frequented by individuals prone to vandalism, such as certain public restrooms and unsupervised public spaces.

Our product comprises two key components: a durable stainless steel frame and a sacrificial layer of polycarbonate positioned in front of the mirror. The stainless steel frame offers robustness and is resistant to minor scratches, which can typically be buffed out using a polishing wheel and a mild abrasive. The polycarbonate layer, designed to protect the mirror, can be easily repaired from scratches with a heat gun, a process that is straightforward and demonstrated in the linked YouTube video. In cases where the polycarbonate layer sustains deep scratches that are beyond repair, it can be conveniently removed and replaced, ensuring the longevity and aesthetic appeal of the product.

Alternate Names:

• Vandal Resistant Stainless Steel Mirror
• Anti-Graffiti Restroom Security Mirror
• Safety Mirror with Sacrificial Plexiglass
• No Glass Security Mirror for Restrooms
• Corrosion Resistant Stainless Steel Mirror
• Surface Mounted Safety Mirror
• Mirror with Protective Plexiglass for Public Restrooms
• Durable Mirror for Vandal Prone Areas
• Restroom Mirror with Warranty
• Full Frame Anti-Graffiti Mirror

This product is available in 304L Stainless Steel and 316L Stainless Steel. For most restroom facilities, 304L is the most cost effective solution. It provides good corrosion resistance in non salt water environments. 316L is preferred by our customers that are located near or on the ocean. Navy ships and public facilities at beaches should opt for the 316L material.

The AA-MTL mirror is ADA compliant when properly mounted and installed.

Customers of this product include public schools, parks, National Forest Service, California Department of Transportation (CALTRANS), and the United States Navy.

• Vandal Resistant
• Made in USA
• Concealed Torx Security Screw Lockable
• NO GLASS! Reflective Surface is Mirror Polished Stainless Steel
• Protective Sacrificial Plexiglass  
• Surface Mounted
• Corrosion Resistant
• Industry Leading Warranty against Vandalism

• 18”x24”, 18”x36”, 24”x36”, 24"x60", 48"x60"
• *Custom sizes available upon request - Contact us for details. Please allow 1-2 business days to respond with a price quote.
• **Custom size option on website is for reference only.  $0 is NOT the actual purchase price - a quote must be generated.
• Depth: 1⅛”

• AA-MTL-18x24-304L-12g
• AA-MTL-18x36-304L-12g
• AA-MTL-24x36-304L-12g
• AA-MTL-24x60-304L-12g
• AA-MTL-48x60-304L-12g

See Website for Additional Options

• Stainless Steel Satin # 4 Finish

• 3/8” Surface Mounting Hole Placements

Inspection Prior to Installation:

Maintaining the flatness of Polished Stainless Steel Mirrors is crucial, particularly for larger sizes. Upon immediate receipt, it's imperative to photograph the unopened packaging from all angles to validate its condition upon arrival, ensuring any shipping damages are thoroughly documented. Before installation, inspect each mirror for quality, which involves carefully removing the protective shrink wrap while it's laid flat and meticulously examining the reflective surface for any abnormalities from potential physical impact. Some minor mirror abnormalities may be considered normal depending on size (see Mirror Surface notes below). While a video of the unpacking process is preferred, at a minimum, photos must be taken. Report any deformities to us before installation; post-installation, mirrors are deemed accepted by the contractor or end user.

Mirror Surface and Reflection Quality:

Though visually similar to glass mirrors, our stainless steel mirrors are crafted through distinct materials and processes to achieve a reflective finish. While generally indistinguishable from glass mirrors, occasional minor imperfections may slightly affect the reflected image. Additionally, due to the light passing through the plexiglass before it hits the reflective surface, there can be a "double image" effect. This occurs because light reflects off both the plexiglass surface and the stainless steel mirror surface, causing a slight offset between the two images. This phenomenon is a normal result of the physics involved.

Primarily sold as a safer alternative to glass, especially where breakage poses a liability, these mirrors are ideal for high-impact or high-vibration environments like gyms, public restrooms, school hallways, or vehicle engine bays. Customers choose them, acknowledging the potential for minor reflective discrepancies and the "double image" effect, valuing their enhanced safety and durability in scenarios where traditional mirrors are prone to damage. The purpose of these mirrors is not to provide a perfect mirror reflection but rather an acceptable mirror reflection while ultimately providing superior durability for high vibration, impact or vandal prone facilities.

To ensure the longevity and optimal performance of your vandal-resistant framed mirror, it is crucial to prevent moisture from getting between the sacrificial plexiglass and the polished stainless steel reflective surface. If moisture accumulates in this area, it can lead to mold growth between the two layers.

1. Use a Mild Cleaning Agent: Clean the surfaces using a mild cleaning agent, such as Windex, and a microfiber cloth. This will help avoid scratching the mirror or plexiglass.
2. Ensure Complete Dryness: Before reassembling the mirror, make sure that both the plexiglass and the reflective surface are completely dry. This will help prevent moisture buildup and potential mold growth.

By following these instructions, you can maintain the integrity and appearance of your vandal-resistant mirror.

Pre-Installation Cleaning Required: Before installation, it is mandatory to clean both the plexiglass and the reflective surface. This step is essential due to potential moisture that might have crept in during shipping. Ensure that both surfaces are completely dry before reassembling the mirror to prevent moisture buildup and potential mold growth.

Secure fixture to wall with appropriate 3⁄8” stainless steel anchoring hardware for optimal installation strength (not provided). Recommend 3⁄4” or greater back bracing for walls. Partitions may require T-nuts or other suitable anchoring devices.

Mirror shall be constructed with American made, 12 gauge 304L or 12 gauge 316L Stainless Steel joined /w TIG welds and edges de-burred. Mirror shall not be cross-metal contaminated during manufacturing construction. Mirror housing and sacrificial plexiglass surface shall provide protective cover for polished stainless steel reflective surface. Dispenser shall have 3⁄8” mounting holes. 12 gauge models shall include a 10 year standard or 20 year optional functional warranty against vandalism when properly installed & locked while in service. 316L SS shall be used for US Navy maritime use or if exposure to salt water is prevalent.

All of Vandal Stop Products are made by hand in the USA using American-sourced stainless steel. While some products might be available in stock, most are made to order. Our general estimated lead times are:

• Quantity 1 - 10 = ~4 to 6 weeks for production
• Quantity 11 - 50 = ~4 to 8 weeks for production
• Quantity 51 - 100 = ~6 to 10 weeks for production
• Quantity 101 - 200 = ~10 to 16 weeks for production
• Quantity 200+ = Call for estimate

Due to holidays and winter weather, some production delays may occur during the months of November, December, January, and February. 

Due to increased demand, more time be required for production. If you have a critical delivery date requirement, please call or email to verify lead times prior to placing an order.

Stocked Items

For certain items that we sell often, we do our best to either keep inventory on the shelf or keep a constant production cue going. For items that are considered "stocked" we will generally be able to ship within 5 business days or less.

Why Are Stocked Items More Expensive?

We're adapting to your needs! While we specialize in made-to-order products, we recognize the growing demand for immediate availability. Adjusting to this requires foresight in demand anticipation, material procurement, initiating stock production, and warehousing—all incurring additional costs. Consequently, our stocked items are priced to reflect these overheads. For customers who can accommodate a production lead time, we're pleased to offer discounted pricing as a thank you for your flexibility.

Credit Card orders will be charged at the time of checkout. If you wish to be billed when your order ships, you can use the "Pay by Purchase Order" option on the payment section of checkout. You will be asked to upload a PDF copy of your Purchase Order along with a reseller certificate of tax exempt status is applicable. We will invoice you once your order has been shipped.

For more information, contact us or read our full Production Lead Times Policy.